변군이글루

[switch] Vlan 설정 (정적 포트별 나누기) 본문

이___네트워크

[switch] Vlan 설정 (정적 포트별 나누기)

변군 변군이글루 2013.09.06 16:58

Vlan 설정 (정적 포트별 나누기)

 

Switch>enable
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 100//vlan 100 생성
Switch(config-vlan)#vlan 200//vlan 200 생성
Switch(config-vlan)#end
%SYS-5-CONFIG_I: Configured from console by console
Switch#show vlan
VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
                                                Fa0/5, Fa0/6, Fa0/7, Fa0/8
                                                Fa0/9, Fa0/10, Fa0/11, Fa0/12
                                                Fa0/13, Fa0/14, Fa0/15, Fa0/16
                                                Fa0/17, Fa0/18, Fa0/19, Fa0/20
                                                Fa0/21, Fa0/22, Fa0/23, Fa0/24
                                                Gig1/1, Gig1/2
100  VLAN0100                         active   
200  VLAN0200                         active   
1002 fddi-default                     active   
1003 token-ring-default               active   
1004 fddinet-default                  active   
1005 trnet-default                    active  
VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1    enet  100001     1500  -      -      -        -    -        0      0
100  enet  100100     1500  -      -      -        -    -        0      0
200  enet  100200     1500  -      -      -        -    -        0      0


--------------인터페이스에서 정적으로 Vlan 설정하기---------------------
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#interface fastEthernet 0/1
Switch(config-if)#switchport access vlan 100
Switch(config-if)#interface fastethernet 0/2
Switch(config-if)#switchport access vlan 200
Switch(config-if)#end
%SYS-5-CONFIG_I: Configured from console by console
Switch#show vlan
VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/3, Fa0/4, Fa0/5, Fa0/6
                                                Fa0/7, Fa0/8, Fa0/9, Fa0/10
                                                Fa0/11, Fa0/12, Fa0/13, Fa0/14
                                                Fa0/15, Fa0/16, Fa0/17, Fa0/18
                                                Fa0/19, Fa0/20, Fa0/21, Fa0/22
                                                Fa0/23, Fa0/24, Gig1/1, Gig1/2
100  VLAN0100                         active    Fa0/1
200  VLAN0200                         active    Fa0/2
1002 fddi-default                     active   
1003 token-ring-default               active   
1004 fddinet-default                  active   
1005 trnet-default                    active  
VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1    enet  100001     1500  -      -      -        -    -        0      0
100  enet  100100     1500  -      -      -        -    -        0      0
200  enet  100200     1500  -      -      -        -    -        0      0
1002 enet  101002     1500  -      -      -        -    -        0      0
1003 enet  101003     1500  -      -      -        -    -        0      0
1004 enet  101004     1500  -      -      -        -    -        0      0
1005 enet  101005     1500  -      -      -        -    -        0      0

Switch#

 

 

 

 

0 Comments
댓글쓰기 폼